Paper Baler Compactor
Paper Baler Compactor for Shredded Paper Recycling
Paper Baler Compactor Machine for Shredded Paper Recycling and Paper Disposal
Paper Baler Comapctor for Recycling Waste
CMT provides a Multi-Purpose Paper Baler that makes Recycling Paper Products and Waste easier than ever. The CMT Paper Baler Machine can automatically roll, compact, and shrink-wrap voluminous paper waste, shredded paper, paper, bags, newspapers, and other paper products. Paper Balers provide a quick ROI that can save you valuable factory space and reduce waste removal costs. Our plastics baler has been engineered with wheels to make it mobile, so you can dispose of your paper recycling materials at any location within your warehouse. Consult with a CMT material handling expert to discuss your specific application and the optimal solution for your paper recycling needs.
Multi-Purpose Baler Compactor
Decrease Labor / Increase Sanitation
Advanced Safety Features
Paper Waste and Shredded Paper
Packing Paper and Paper Packaging
Portable Units for Convenient Recycling
Features and Advantages
Features of the Baler Compactor:
- Add Valuable Warehouse Space by Compacting Packaging Paper Waste
- Automatically Compresses and Rolls Paper Recyclables into a Bale
- Mobile and Compact Design
- Improve Plant and Factory Hygiene/Sanitation Conditions
- Advanced Safety Features Protects Your Operators
- Heavy Duty Strength without Space Wasting
- Cost Savings on Labor, Storage, and Transportation
Compactable Materials of the Baler Compactor:
- Paper Packaging
- Shredded Paper Waste
- Newspaper, Scrap Paper, Wax Paper
- Recyclable brown paper
- Paper Bags
Technical Information
- For compacting super sacks and similar material, equipped with electrical equipment suitable for operating voltage 480 V (3 PH + N + PE) / 60 Hz
- Three-phase gear motor 3 kW, 480 V / 60 Hz, enclosure IP 54, efficiency class IE3, Heavy duty base frame and strong main drive via roller chain
- Easy accessibility for cleaning, maintenance or service via the inspection doors on the machine’s side walls and on the rear wall
- Inspection doors and flaps are secured by safety switches
- Safety panels at the feed table and at the bale ejection
- Electrical control panel with main switch and reset button at the front (feeding side)
- Electrical control prepared for reverse run with automatic overload protection with potentiometers to adjust wrapping sequence and to adjust operating time
- Fully automatic control for wrapping system, cutting of wrapping film, function of ejection door and compacted bale ejection,
- Control unit at the feed table featuring “start”, “stop” and “reverse run” buttons with selector switches for setting mode of operation and for setting different bale diameters, with switch to operate bale ejection door manually and with an alarm to signal "bale full"
- Separate multi-function display for continuous indication of filling level and with daily and lifetime counters for operating hours and number of bales
- Additional flashing light to indicate “bale full”
- Bale counter at the compacted bale ejection
- Castors on the stands
- 3-meter connection cable to power supply
- Machine finish according to RAL 7016 (framework) and according to RAL 7038 (covers & doors)
- Stretch wrap tying including 1 roll of stretch wrap plastic film, fitted to the machine
- Feed table for manual loading of bulk bags or recyclable material
- Dust hood above feed table with socket pipe for connection to central dust extraction
- Dust collection drawer below the machine
Description of working method:
After sorting out the bulk bags or recycling material, it can be placed on the table of the machine. Insert the material into the chute, allowing the conveying belt to grasp it and pull it into the compacting chamber and where it is then rolled by the machines rotating action of two belts. As more and more bulks bags or material is inserted into the chute, the two conveying belts form a cylindrical bale where the recyclable material or waste is compacted. The material remains compacted inside the machine, allowing the compacting process to take place on-demand and allowing the operator to insert bags as needed. The compacting progress is displayed continuously via an LED display. After achieving the pre-selected bale size (Model RC 655 has three bale diameters that can be selected), the bale wrapping is initiated by pulling the plastic wrap and inserting it into the feed intake chute. The compacted bulk bags (or material) are then automatically wrapped with the plastic film. After the wrapping process is completed, the plastic film is automatically cut by the machine. The baling compartment is then opened with a push of a button on the operating console and will close again automatically after having ejected the compacted bale. The RC 655 fully automates the cutting process, as well as ejecting the compacted bulk bags.
Email us at info@cmtnc.com or Fill Out the Contact Form Below