CMT provides a full range of bin dischargers including standard eccentric driven units & cone valve units.

A standard Bin Activator is hung from a matching flange on the silo. An internal baffle or cone is fixed inside the bin activator and the unit is connected with a high performance rubber sleeve. This allows the bin activator to move freely in an elliptical action.  Through the bin activator’s stationary cone, vibration is imparted vertically, into the material in the silo, thereby consistently promoting material flow.

 

Some of the most common discharge problems in dry material storage are rat-holing, bridging, degradation, and segregation. A bin activator solves this by transmitting vibration to the material and allowing mass flow.

 

The Bin Activator that CMT offers has many advantages:
* The bin activator Resolves Discharge Problems - Material discharges in a

   first in/first out basis. The Bin Activator eliminates degradation,

   segregation,  flushing, and bridging, and insures complete discharge.
* The bin activator Produces Even Bulk Density - The vibration of the bin

   activator de-aerates the product and creates an even bulk density.
* The bin activator Controlled Product Flow Rate - The product flow rate is

   controlled controlling the internal annular gap by increasing or decreasing  

   the diameter of the internal cone.
* Quality, Experience, and Cost -CMT offers consulting for our low-cost quality

   bin activators, and we will make sure the bin activators are properly installed.

Bin Activator Picture

The Soliflo™ Cone Valve Bin Discharger is bolted directly to the silo, thereby eliminating any potential leak points. The unit works as a bin activator and valve as it completely stops material flow when lowered, providing two functions in one simplistic design:  Bin Activator and Shut-Off Valve.

Design
An internal pneumatic probe is fitted within the structure of the Cone Valve Discharger.  The Cone Volve Discharger has no moving parts. An air actuated Firestone bellow is filled to raise and lower the internal cone, thereby overcoming bridging and consistently promoting material flow.

Open Cone Valve Bin Discharger
Closed Cone Valve Bin Discharger

Cone Valve Bin Discharger in Closed Position

Cone Valve Bin Discharger Design

Cone Valve Bin Discharger in Open Position

Carolina Conveying logo

Cone Valve Discharger

Bin Activator

Design Issues

Cone Valve Dischargers

Design Issues

Quote_Button2
gallery
bulk material handling header
bulk material handling solutions

[Home] [Manufacturers] [Equipment] [Components] [Literature] [Case Histories] [3Sigma] [About CMT] [Contact Us] 704-846-3737

bulk material handling footer

[Home] [Manufacturers] [Equipment] [Components] [Literature] [Case Histories] [Data Sheets] [3Sigma] [About CMT] [Contact Us] 704-846-3737

Request a Quote

> Home

_______________

 

> Manufacturers

> Equipment

Bin Activator

Blenders and Mixers

Bulk Bag Systems

Dust Collection

Feeders & Weigh Systems

Mechanical Conveyors

Pneumatic Conveying

Silos & Tanks

> Bolted Silos

> Welded Silos

> Bin Activator

Sizing Equipment

Tote/IBC Systems

> Components

_______________

 

> Literature

> Case Histories

> Videos

> Photo Gallery

> Testimonials

_______________

 

> About CMT

> Contact Us

> Partners

Feature-Product-